5800PSI-Quarter-Inch-QC-Plug-Rotating-Turbo-Nozzle

For more information or to place the order over the phone, please call 800-786-9274

One of Water Cannons bestselling Rotating HydroJet Turbo nozzles and rated 5,800 PSI and 195 degree F.  This nozzle now comes standard with a ¼ QC Plug so it is ready to work right out of the box.  Remember always start any rotating nozzle pointing in the downward position to avoid damage to the nozzle.  This rotating turbo nozzle is field repairable by simply removing the protective rubber cover and then unscrewing the large hex nut to replace the old cartridge with the new one.  Repair kits sold separately.

The more powerful pressure washers with pressure levels up to 5800psi can accomplish tasks that most cleaning equipment can't even touch, like stripping paint, degreasing heavy-duty equipment, and removing the most stubborn oil, dirt, grime, and soil residues from concrete, walkways, driveways, sidewalks, brick, building exteriors, and much more. Specially designed accessories can make any pressure cleaning job easier and more efficient. 

For paint stripping or barnacle removal we recommend adding a rotating nozzle to your system. The turbo rotating nozzle increases the blasting power by concentrating a zero degree stream of water into a 25 degree high rpm pattern.   

The exclusive design of the Turbo Nozzle 5800 eliminates start up impact and damage to the internal nozzle. Rotating nozzles are two times as effective as flat nozzles, so you can cut the time it takes to complete a job in half. In fact, you may save even more time, as using a rotating nozzle also eliminates shadowing so there is no need to double back. Lastly, high RPM spraying power in an adjustable 5 to 25 degree circle allows you to focus pressure for stubborn grime. 

Water Cannon recommends always using eye and face protection when operating a pressure washer and the rotating nozzle.

This nozzle works well with equipment rated from 3000-5800 PSI and extreme flow rates up to 20.0 orifice.

• 1/4 quick connect plug installed

• 0 ° impact, 25 ° pattern

• Maximum temperature: 210 °F

• High strength forged brass 

• No gears, no teeth, no bearings 

• Precision ceramic orifice and matching race

• Durable rubber/plastic cover 

Rotating-Turbo-Nozzle-5800-PSI-1/4-Inch-With-QC-Plug

Warning California Proposition 65
Detectable amount of chemicals known to the State of California to cause cancer, birth defects or other reproductive harm may be found in pressure washing equipment, accessories and exhaust. For More Information Visit www.p65warnings.ca.gov

GTIN:	00810013920642
Manufacturer:	Water Cannon
SKU:	16.5018
PSI:	6000
Brand:	GIANT
Temperature:	195 F
Discharge Port Size:	3.0 ORIFICE
Material:	Degrees